KLINGERSIL® C-4324
Characteristic & main applications Universal gasket material for general applications. Gasket material for liquids and steam at lower pressure and temperature, good chemical resistance against water and oil, low gas leakage.
Material Gasket material bound with NBR, based on a combination of synthetic high-tech fibres.
pT diagram
The Klinger pT diagram provides guidelines for determining the suitability of a particular gasket material for a specific application based on the operating temperature and pressure only. Always refer to the chemical resistance of the gasket to the fluid.
Technical Data
Typical values |
Compressibility ASTM F 36 J |
|
% |
10 |
Recovery ASTM F 36 J |
min. |
% |
55 |
Stress relaxation DIN 52913 |
50 MPa, 16 h/300 °C |
MPa |
20 |
Stress relaxation BS 7531 |
|
MPa |
23 |
Klinger hot compression 50 MPa |
thickness decrease at 23°C |
% |
10 |
thickness decrease at 300°C |
% |
25 |
Tightness acc. DIN 3535/6 |
|
mg/s x m |
<0,1 |
Thickness increase ASTM F 146 |
oil JRM 903: 5 h/150 °C |
% |
0-5 |
fuel B: 5 h/23 °C |
% |
0-10 |
Density |
|
g/cm3 |
1,85 | |